JT&T Products

JT&T's Seamless Tubular Copper Lugs are 100% Copper. Lugs can be crimped or soldered and are stackable. Gauge is stamped on lug for easy identification. Lug ends are flared for easy entry. JT&T Products offers a complete selection of copper lugs.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

The PAL fuse series is used primarily in Japanese & Domestic designed car models to provide wiring harness protection. This fuse is a direct factory replacement for fusible link. Currently available in three styles: PAL Bent Terminal (bolts into fuse block), Female & Male Terminations.

JT&T's 2 to 1 Single/Thin Wall Cross-Linked Polyolefin Heat Shrink Tubing is irradiated, flexible & intended for general purpose applications requiring recognition by military & industrial specifications. ULrecognized, CSA certified, RoHS compliant & ABS approved.Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), 3. It is single-wall, flame-retardant, mechanically strong & will not melt or split when shrunk over irregularly-shaped...

56 Series TerminalsAll with .250 Tabs1202 - 18-14 Gauge, Male, Tin Plated Brass - OEM #029719621200 - 18-14 Gauge, Female, Brass - OEM #029624471203 - Male, mates with 1201 and 1202 - OEM #029629841201 - Female, mates with 1203 and 1200 - OEM #02962448

1" Grommets feature a 11/16" ID, 1" hole diameter, and 1/16" groove. Grommets are inexpensive, flexible, oil resistant and have high dielectric strength with outstanding aging qualities. See Specifications tab for measurements. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

PLEASE READ: If the QTY box is grayed out, that item is currently out of stock and unavailable for order. You are welcome to call us to check stock, especially if ordering large quantities. _____________________________ JT&T Products; Stranded annealed, single-conductor copper wire within general purpose thermoplastic (GPT) insulation is standard for original equipment and replacement on vehicular equipment. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard...

PLEASE READ: If the QTY box is grayed out, that item is currently out of stock and unavailable for order. You are welcome to call us to check stock, especially if ordering large quantities. _____________________________ JT&T Products; Stranded annealed, single-conductor copper wire within general purpose thermoplastic (GPT) insulation is standard for original equipment and replacement on vehicular equipment. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard...

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

113/8" Grommets feature a 1" ID,1-3/8" hole diameter, and 1/8" groove. Grommets are inexpensive, flexible, oil resistant and have high dielectric strength with outstanding aging qualities. See Specifications tab for measurements. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Stainless steel wire tie temperature range is from -80°C (-112°F) to 538°C (1000°F). Self locking head w/ smooth edges, low profile, good corrosion resistance, ideal for applications subjected to various chemicals, salts and acids, for use in extreme high temperature environments, flame retardant & non-toxic. JT&T Products is serious about high standards and provides a complete line of cable ties.

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

The PAL fuse series is used primarily in Japanese & Domestic designed car models to provide wiring harness protection. This fuse is a direct factory replacement for fusible link. Currently available in three styles: PAL Bent Terminal (bolts into fuse block), Female & Male Terminations.

JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl (P.V.C),...

⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

100% Copper, True to Gauge, NOT "CCA" wire, Made in the USA.UL/CSA Listed, single conductor tinned wire is ideal for use in the highly corrosive environment of marine applications. Special electro-tinned copper strands also increases protection against corrosion on recreational vehicles, autos, trucks, trailers and agricultural equipment. Tinned copper stranding is extremely flexible for easy routing through marine applications and easier to solder than bare copper. Flame retardant, PVC...

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl (P.V.C),...

100% Copper, True to Gauge, NOT "CCA" wire, Made in the USA.UL/CSA Listed, single conductor tinned wire is ideal for use in the highly corrosive environment of marine applications. Special electro-tinned copper strands also increases protection against corrosion on recreational vehicles, autos, trucks, trailers and agricultural equipment. Tinned copper stranding is extremely flexible for easy routing through marine applications and easier to solder than bare copper. Flame retardant, PVC...

JT&T’s 2 to 1 Single/Thin Wall Cross-Linked Polyolefin Heat Shrink Tubing is irradiated, flexible & intended for general purpose applications requiring recognition by military & industrial specifications. UL recognized, CSA certified, RoHS compliant & ABS approved. Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), 3. It is single-wall, flame-retardant, mechanically strong & will not melt or split when shrunk over irregularly-shaped...

JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl (P.V.C),...

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

The PAL fuse series is used primarily in Japanese & Domestic designed car models to provide wiring harness protection. This fuse is a direct factory replacement for fusible link. Currently available in three styles: PAL Bent Terminal (bolts into fuse block), Female & Male Terminations.