JT&T Products

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

Heat Shrink Solder Seal terminals feature a band of low melt solder in the middle of heat shrink. They allow you to solder and shrink in one step. Note these terminals do not crimp on and are solder only. If you would like the crimp as well, consider the Crimp & Solder Seal Terminals. JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's...

JT&T Products offers a full line of non-insulated & insulated terminals made from vinyl (P.V.C), nylon & heat shrink.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

.75" Mounts feature 40lb tensile strength, 1" Mounts feature 75lb tensile strength.JT&T's Cable Tie Mounts have an adhesive backing - simply peel off backing paper and apply. In addition to and/or in place of the adhesive backing a #6 screw (for 1" mounts) & #4 screw (for .75" mounts) can be used to secure the mount onto a surface. Cable Tie Mounts are made of industry standard 6/6 UL94 V-2 nylon (offered in natural or black), they are injection molded to give you consistent performance and...

For .250 Tabs. JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals...

100% Copper, True to Gauge, NOT "CCA" wire, Made in the USA.UL/CSA Listed, single conductor tinned wire is ideal for use in the highly corrosive environment of marine applications. Special electro-tinned copper strands also increases protection against corrosion on recreational vehicles, autos, trucks, trailers and agricultural equipment. Tinned copper stranding is extremely flexible for easy routing through marine applications and easier to solder than bare copper. Flame retardant, PVC...

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products offers a full line of non-insulated & insulated terminals made from vinyl (P.V.C), nylon & heat shrink.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Heat Shrink Solder Seal terminals feature a band of low melt solder in the middle of heat shrink. They allow you to solder and shrink in one step. Note these terminals do not crimp on and are solder only. If you would like the crimp as well, consider the Crimp & Solder Seal Terminals. JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after crimping. JT&T's...

JT&T’s 2 to 1 Single/Thin Wall Cross-Linked Polyolefin Heat Shrink Tubing is irradiated, flexible & intended for general purpose applications requiring recognition by military & industrial specifications. UL recognized, CSA certified, RoHS compliant & ABS approved. Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), 3. It is single-wall, flame-retardant, mechanically strong & will not melt or split when shrunk over irregularly-shaped...

JT&T Products offers a full line of non-insulated & insulated terminals made from vinyl (P.V.C), nylon & heat shrink.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion.  Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping.  JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated.  Electro Tin plating provides exceptional corrosion resistance.  Insulator sleeve is color-coded for wire size and identification. ...

JT&T’s 2 to 1 Single/Thin Wall Cross-Linked Polyolefin Heat Shrink Tubing is irradiated, flexible & intended for general purpose applications requiring recognition by military & industrial specifications. UL recognized, CSA certified, RoHS compliant & ABS approved. Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), 3. It is single-wall, flame-retardant, mechanically strong & will not melt or split when shrunk over irregularly-shaped...

100% Copper, True to Gauge, NOT "CCA" wire, Made in the USA.UL/CSA Listed, stranded single conductor tinned wire is ideal for use in the highly corrosive environment of marine applications. Special electro-tinned copper strands also increases protection against corrosion on recreational vehicles, autos, trucks, trailers and agricultural equipment. Tinned copper stranding is extremely flexible for easy routing through marine applications and easier to solder than bare copper. Flame retardant,...

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

Crimp and Solder Seal terminals feature a band of solder above the connection. After crimping normally, apply heat to activate the heat shrink. The low melt solder will flow into the connection. This provides the best possible connection - no loss of conductivity and is stronger than the wires themselves. JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after...

Adapter to allow you to pull power from a ATC / ATO fuse terminal.

Crimp and Solder Seal terminals feature a band of solder above the connection. After crimping normally, apply heat to activate the heat shrink. The low melt solder will flow into the connection. This provides the best possible connection - no loss of conductivity and is stronger than the wires themselves. JT&T's Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maximum contact and tensile strength after...

JT&T Products offers a full line of non-insulated & insulated terminals made from vinyl (P.V.C), nylon & heat shrink.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

JT&T’s 2 to 1 Single/Thin Wall Cross-Linked Polyolefin Heat Shrink Tubing is irradiated, flexible & intended for general purpose applications requiring recognition by military & industrial specifications. UL recognized, CSA certified, RoHS compliant & ABS approved. Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), 3. It is single-wall, flame-retardant, mechanically strong & will not melt or split when shrunk over irregularly-shaped...

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T's Nylon Insulated Terminals have been injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

JT&T’s 2 to 1 Single/Thin Wall Cross-Linked Polyolefin Heat Shrink Tubing is irradiated, flexible & intended for general purpose applications requiring recognition by military & industrial specifications. UL recognized, CSA certified, RoHS compliant & ABS approved. Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), 3. It is single-wall, flame-retardant, mechanically strong & will not melt or split when shrunk over irregularly-shaped...