JT&T Products

Fast Acting /Open Link Design A cost-effective fuse for use in high power DC, forklift, marine and other large battery application. Terminals are gold plated to prevent corrosion to provide superior contact. Electrical Specifications 35A-400A 250VAC/32VDC Interrupting Rating 1000A @ 32 VDC 1500A @ 250 VAC

NOTE: Neon Green is a brighter shade than our standard green, but not what most people would consider a 'neon' shade.  4" Wire / Cable Ties Feature 18lb Tensile Strength. 5.5" Wire / Cable Ties Feature 40lb Tensile Strength. 7.5" Wire / Cable Ties Feature 50lb Tensile Strength. 11.5" Wire / Cable Ties Feature 50lb Tensile Strength. 14.5" Wire / Cable Ties Feature 50lb Tensile Strength. JT&T's Wire Ties are made of industry standard 6/6 UL94 V-2 nylon, they are injection molded to...

14.5" Wire / Cable Ties Feature 50lb Tensile Strength. JT&T's Wire Ties are made of industry standard 6/6 UL94 V-2 nylon, they are injection molded to give you consistent performance and exact fit. Ongoing quality control measures assure you of products you can count on under demanding conditions. Look to JT&T Products for nylon wire ties with superior tensile strength achieved from one piece construction, resistance to fading and cracking, and lower insertion force requirements. Lowest...

JT&T Products; Maxi-Fuse is a fast-acting blade fuse, standard for vehicle circuit protection. The maxi-fuse is designed to provide predictable time delay and low heat dissipation. Plastic housing is color-coded for easy identification of fuse ratings. Temperature rating of 105C (221F). Voltage rating of 32V. JT&T Products offers a complete selection of fuses, including Smart Glow!

3/8" Vinyl Vacuum Caps - JT&Ts vinyl vacuum caps are resistant to tearing cracking or splitting. They are flexible to fit a range of sizes or irregular objects. Can be used to protect threads, mask for painting, cap the end of sharp wire rod or pipe, or even cap off a vacuum port.⚠️ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

JT&T Spiral-Cut Polyethylene Tubing is a highly flexible wrap used to hold bundles of wire, cable, tubing & control rods for protection from abrasion & for noise suppression.  It has an elastic memory & tends to come back to & hold its original shape.  Spiral tubing allows quick, easy bundling of multiple line of wires, cables, or tubing holding firmly but allows flexibility.  It wraps on like tape & can be re-used quickly & simply.  Openings in the spiral wrap...

JT&T Products; UL/CSA 1015 general purpose electrical motor and hook-up wire is stranded, single-conductor bare copper wire within 1/32" polyvinyl chloride (PVC) insulation. 1015 wire is multi-rated for internal wiring of appliances, equipment and for machine tools. Excellent choice for any HVAC or RV application. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Tubing. 1015 wire is rated at 600 Volts with a temperature rating of 105°C (221°F). RoHS compliant....

JT&T Products offers a full line of non-insulated & insulated terminals made from vinyl (P.V.C), nylon & heat shrink.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T Products; UL/CSA 1015 general purpose electrical motor and hook-up wire is stranded, single-conductor bare copper wire within 1/32" polyvinyl chloride (PVC) insulation. 1015 wire is multi-rated for internal wiring of appliances, equipment and for machine tools. Excellent choice for any HVAC or RV application. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Tubing. 1015 wire is rated at 600 Volts with a temperature rating of 105°C (221°F). RoHS compliant....

JT&T Products; UL/CSA 1015 general purpose electrical motor and hook-up wire is stranded, single-conductor bare copper wire within 1/32" polyvinyl chloride (PVC) insulation. 1015 wire is multi-rated for internal wiring of appliances, equipment and for machine tools. Excellent choice for any HVAC or RV application. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Tubing. 1015 wire is rated at 600 Volts with a temperature rating of 105°C (221°F). RoHS compliant....

JT&T Products; UL/CSA 1015 general purpose electrical motor and hook-up wire is stranded, single-conductor bare copper wire within 1/32" polyvinyl chloride (PVC) insulation. 1015 wire is multi-rated for internal wiring of appliances, equipment and for machine tools. Excellent choice for any HVAC or RV application. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Tubing. 1015 wire is rated at 600 Volts with a temperature rating of 105°C (221°F). RoHS compliant....

JT&T Products; UL/CSA 1015 general purpose electrical motor and hook-up wire is stranded, single-conductor bare copper wire within 1/32" polyvinyl chloride (PVC) insulation. 1015 wire is multi-rated for internal wiring of appliances, equipment and for machine tools. Excellent choice for any HVAC or RV application. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Tubing. 1015 wire is rated at 600 Volts with a temperature rating of 105°C (221°F). RoHS compliant....

Manufactured by the same company, on the same equipment, for over 100 years! If you are looking for an authentic asphalt coated loom for your restoration project, this is it! JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791...

JT&T's Seamless Tubular Copper Lugs are 100% Copper. Lugs can be crimped or soldered and are stackable. Gauge is stamped on lug for easy identification. Lug ends are flared for easy entry. JT&T Products offers a complete selection of copper lugs.

Note:Female is the "Tower"  which contains the female terminal.Male is the "Shroud" which contains the male terminal. Shrouds do NOT include wires, terminals or seals. Those are available separately.Six Cavity Male Shroud - OE # 12010975Six Cavity Female Shroud - OE # 12015799Six Cavity Female 18 AWG Pigtail - OE # 12126454

5/8" Grommets feature a 1/2" ID, 5/8" hole diameter, and 1/16" groove. Grommets are inexpensive, flexible, oil resistant and have high dielectric strength with outstanding aging qualities. See Specifications tab for measurements. ⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

JT&T's Vinyl Insulated Terminals have been PVC injection molded with funnel entry for fast, easy wire insertion. Terminals have "V" groove serrations to provide maximum contact and tensile strength after crimping. JT&T's terminals are constructed from pure copper (Alloy 110), annealed & electro tin plated. Electro Tin plating provides exceptional corrosion resistance. Insulator sleeve is color-coded for wire size and identification. JT&T Products offers a full line of terminals made from vinyl...

1/2" Vinyl Vacuum Caps - JT&Ts vinyl vacuum caps are resistant to tearing cracking or splitting. They are flexible to fit a range of sizes or irregular objects. Can be used to protect threads, mask for painting, cap the end of sharp wire rod or pipe, or even cap off a vacuum port.⚠️ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

7.5" and 14.5" Heavy Duty Cable Ties feature 120lb tensile strength  17", 24", 36" AND 48" Heavy Duty Cable Ties feature 175lb tensile strength JT&T's Heavy-Duty Wire Ties are made of industry standard 6/6 UL94 V-2 nylon, they are injection molded to give you consistent performance and exact fit. Ongoing quality control measures assure you of products you can count on under demanding conditions.  Look to JT&dT Products for nylon wire ties with superior tensile strength achieved from...

Day or Night when a fuse blows these "Smart Glow" type Indicator Fuses indicate immediately which fuse needs replacing. Saves time and effort. Eliminates guesswork and testing. Makes trouble-shooting a snap, even in the dark. Built to exacting OEM specifications. Ideal for troublesome circuits where fuses often blow. Snaps into place without the use of tools. Easy identification of blown fuses in hard to reach locations. Color-coded fuses instantly let you know the right amperage of the fuse...

JT&T Spiral-Cut Polyethylene Tubing is a highly flexible wrap used to hold bundles of wire, cable, tubing & control rods for protection from abrasion & for noise suppression. It has an elastic memory & tends to come back to & hold its original shape. Spiral tubing allows quick, easy bundling of multiple line of wires, cables, or tubing holding firmly but allows flexibility. It wraps on like tape & can be re-used quickly & simply. Openings in the spiral wrap tubing let you see the individual...

JT&T Products offers a full line of non-insulated & insulated terminals made from vinyl (P.V.C), nylon & heat shrink.⚠ WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov

If the QTY box is grayed out, that item is currently out of stock and unavailable for order. You are welcome to call us to check stock, especially if ordering large quantities. _____________________________ JT&T Products; Stranded annealed, single-conductor copper wire within general purpose thermoplastic (GPT) insulation is standard for original equipment and replacement on vehicular equipment. Its smooth surface makes it ideal for pulling through loom or JT&T Flex-Guard Convoluted Tubing....